Because you invest a lot in equipment, keeping it performing at optimal levels is important. There are three ways to achieve this:
- Proper cleaning
- Proper maintenance
- Proper transportation
Cleaning
Keeping your machine clean of concrete can add years of life to your investment. Keep these tips in mind:
- Pressure wash all concrete off of unit and use Delete Krete to remove stubborn spots.
- Be sure not to pressure wash too close to your radiator and electrical components.
- Always grease machine after washing to push out water buildup.
Maintenance
- Keep concrete off by using Kleen Kote, making sure not to get it on your belts. Grease all lube points daily.
- Make sure to service at specified intervals per the owner’s manual.
- Check for excessive play in drive line, arms and shafts, and replace before they cause more damage.
- Always use OEM filters.
Transportation
Trowels
- Shut off fuel before transporting.
- Always place on clean, flat surface, not on rocks or debris.
- Make sure blades are not pitched.
- Always lift and strap at correct points.
Saws
- Shut off fuel before transporting.
- Place unit in lowered position, with blade removed from unit.
- Always place on clean, flat surface, not on rocks or debris.
- Always lift and strap at correct points.