Kraft 48 in. Flat Wire Texture Broom - 1/2 in. Spacing

A popular tool to create non-skid surfaces on highways, bridges, airport runways, ramps, driveways, and cattle pens. The Flat Wire Texture Broom produces a uniform rough groove surface on roads and bridges for maximum traction and to keep water flowing off the road. In addition to traction and drainage surface tining helps diminish the noise pollution created with traffic. The snap-out, snap-in replaceable tines are blue spring steel. The .28" thick tine is stiff enough to create groove, but provides a slight "give" for durability. The standard exposed length, extending from comb head, is 5" in length by 1/8" in width. Tine spacing of 1/2" between the center of a tine to the center of the next tine. Check with your local Department of Transportation (DOT) for spacing requirements on specific jobs. The 48" long broom has an attached clevis bracket. Use with a clevis handle or an adapter for use with bull float handles; all handles sold separately. Proudly made in the USA.

• Broom produces a uniform rough groove surface on roads and bridges for max traction and water flow
• Spacing is 1/2" center to center
• Snap-out, snap-in replaceable tines are blue spring steel
• 5" Long tines are 1/8" wide and .028" to create grooves for non-skid surfaces
• Use with Clevis Handle or Adapter